Automatic two-hand sanitizer dispenser in stainless steel

인력 및 재료 오염 제거 장비

자동 양손 소독제 분배기

An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.

Simultaneous two-hand positioning
Enclosed spray hand ports
Touchless presence sensing
Cycle-completion output

견적 요청 제품 찾아보기

상품 소개

The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.

주요 기능

Separate ports guide the user to position both hands for the programmed cycle.

Opposed nozzles can apply the selected sanitizer around the intended hand area.

Optical sensing avoids the need for a shared activation button.

An enclosed port geometry contains overspray above a removable drip tray.

A completion output can be made available to compatible external control equipment.

고객 제품 관심사

A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.

A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.

Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.

Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.

Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.

일반적인 응용 프로그램

Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access

기술 매개변수

Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.

핵심 재료	Chemical-resistant polyethylene fluid lines in a SUS304 enclosure
패널 두께	1.2–1.5 mm stainless steel enclosure panels
유효 폭	350–600 mm operator access width
최대 길이	500–900 mm overall dispenser height
강철 면면 두께	1.2–1.5 mm SUS304
코어 밀도	930–960 kg/m³ for polyethylene fluid components
열전도도 (Thermal Conductivity)	0.40–0.50 W/(m·K) for polyethylene fluid components
표면 마무리	Brushed SUS304 with chemical-resistant hand ports and drip tray
접합 유형	Sealed dispenser cabinet with removable reservoir and drain-tray connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay

Planning a Automatic Two-Hand Sanitizer Dispenser specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.