Automatic two-hand sanitizer dispenser in stainless steel

人員 · 材料の汚染除去設備

自動二手消毒器ディスペンサー

An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.

Simultaneous two-hand positioning
Enclosed spray hand ports
Touchless presence sensing
Cycle-completion output

見積もりリクエスト製品案内

商品紹介

The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.

主要な特徴

Separate ports guide the user to position both hands for the programmed cycle.

Opposed nozzles can apply the selected sanitizer around the intended hand area.

Optical sensing avoids the need for a shared activation button.

An enclosed port geometry contains overspray above a removable drip tray.

A completion output can be made available to compatible external control equipment.

お客様の製品に関する懸念事項

A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.

A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.

Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.

Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.

Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.

典型的な用途

Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access

技術的なパラメータ

Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.

コア材料	Chemical-resistant polyethylene fluid lines in a SUS304 enclosure
パネルの厚さ	1.2–1.5 mm stainless steel enclosure panels
有効幅	350–600 mm operator access width
最大長さ	500–900 mm overall dispenser height
鋼鉄の厚さを直面する	1.2–1.5 mm SUS304
コア密度	930–960 kg/m³ for polyethylene fluid components
熱伝導率	0.40–0.50 W/(m·K) for polyethylene fluid components
表面仕上げ	Brushed SUS304 with chemical-resistant hand ports and drip tray
ジョイントタイプ	Sealed dispenser cabinet with removable reservoir and drain-tray connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay

Planning a Automatic Two-Hand Sanitizer Dispenser specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する