Automatic two-hand sanitizer dispenser in stainless steel

Equipement de décontamination du personnel et du matériel

Dispenseur désinfectant automatique à deux mains

An enclosed dispenser that treats both hands with a metered sanitizer spray after the user places them in separate hand ports.

Simultaneous two-hand positioning
Enclosed spray hand ports
Touchless presence sensing
Cycle-completion output

Demander un devis. Browse les produits

Introduction de produit

The Automatic Two-Hand Sanitizer Dispenser uses two enclosed hand ports to position both hands before a metered sanitizer spray is released. Optical sensing can prevent dispensing until both ports are occupied, while the enclosed geometry directs excess liquid to a removable drip tray. A dry-contact output can be used by connected equipment after the programmed dispense cycle is complete.

Key Features

Separate ports guide the user to position both hands for the programmed cycle.

Opposed nozzles can apply the selected sanitizer around the intended hand area.

Optical sensing avoids the need for a shared activation button.

An enclosed port geometry contains overspray above a removable drip tray.

A completion output can be made available to compatible external control equipment.

Préoccupations du client produit

A wall-mounted pump dispenser cannot confirm two-hand positioning or contain excess liquid at a busy entry route.

A single hand pump dose may be applied inconsistently.The two-port arrangement uses metered nozzles after both hands are positioned.

Users activate a dispenser with one hand and continue through the entrance.Sensors can require both hand ports to be occupied before the cycle begins.

Spray from an open dispenser reaches the floor below it.Enclosed hand ports direct excess liquid to a removable drip tray.

Connected entry equipment needs a signal only after dispensing is complete.The controller can provide a dry-contact completion output at the end of the programmed cycle.

Les applications typiques

Food production hygiene barriersCleanroom personnel entriesPharmaceutical support areasMedical manufacturing changing roomsControlled packaging access

Paramètres techniques

Cabinet format, hand-port geometry and solution-reservoir arrangement can be selected for the entrance layout and chosen sanitizer.

Matériaux de base	Chemical-resistant polyethylene fluid lines in a SUS304 enclosure
Panneau épaisseur	1.2–1.5 mm stainless steel enclosure panels
Largeur effective	350–600 mm operator access width
Longueur maximale	500–900 mm overall dispenser height
Acier face épaisseur	1.2–1.5 mm SUS304
Densité Core	930–960 kg/m³ for polyethylene fluid components
Conductivité thermique	0.40–0.50 W/(m·K) for polyethylene fluid components
surface finie	Brushed SUS304 with chemical-resistant hand ports and drip tray
Type joint	Sealed dispenser cabinet with removable reservoir and drain-tray connections
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Pedestal or wall-mounted bodyReservoir level alarmChoice of hand-port orientationExternal completion relay

Planning a Automatic Two-Hand Sanitizer Dispenser specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe