Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Automático Sliding-Door Cleanroom Air Shower
A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.
- Touch-Free Sliding Doors
- Presence Detection
- Anti-Pinch Protection
- Hands-Free Gowned Access
Introdução do produto
This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.
Características-chave
Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.
Safety beams can stop or reverse the door if the clear opening is obstructed.
Closed-position feedback prevents the cleaning cycle from beginning too early.
Covered guides keep mechanical components away from the clean floor surface.
Preocupações do produto do cliente
Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.
Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.
A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.
The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.
Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.
Aplicações típicas
Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms
Parâmetros técnicos
Typical values for a sensor-operated sliding-door air shower are listed below.
| Material principal | Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles |
|---|---|
| Painel de espessura | 50 mm insulated wall and roof panels |
| Largura efetiva | 900-1400 mm clear automatic doorway width |
| Comprimento máximo | Up to 3000 mm chamber and door-pocket length |
| Aço enfrentando espessura | 1.0-1.2 mm body facing with reinforced operator support rail |
| Densidade Core | 40-50 kg/m³ rigid polyurethane or composite insulation |
| Condutividade térmica | 0.024-0.031 W/(m·K) for the insulated enclosure panel |
| Superfície acabado | Smooth white powder coat or brushed stainless steel with covered door tracks |
| Tipo conjunto | Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package
Planning a Automatic Sliding-Door Cleanroom Air Shower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
