Three-quarter view of an automatic sliding-door cleanroom air shower

人員 · 材料の汚染除去設備

A 自動スライドドアクリーンルーム空気シャワー

A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.

Touch-Free Sliding Doors
Presence Detection
Anti-Pinch Protection
Hands-Free Gowned Access

見積もりリクエスト製品案内

商品紹介

This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.

主要な特徴

Presence sensing can initiate a hands-free entry sequence.

Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.

Safety beams can stop or reverse the door if the clear opening is obstructed.

Closed-position feedback prevents the cleaning cycle from beginning too early.

Covered guides keep mechanical components away from the clean floor surface.

お客様の製品に関する懸念事項

Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.

Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.

A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.

The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.

Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.

典型的な用途

Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms

技術的なパラメータ

Typical values for a sensor-operated sliding-door air shower are listed below.

コア材料	Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles
パネルの厚さ	50 mm insulated wall and roof panels
有効幅	900-1400 mm clear automatic doorway width
最大長さ	Up to 3000 mm chamber and door-pocket length
鋼鉄の厚さを直面する	1.0-1.2 mm body facing with reinforced operator support rail
コア密度	40-50 kg/m³ rigid polyurethane or composite insulation
熱伝導率	0.024-0.031 W/(m·K) for the insulated enclosure panel
表面仕上げ	Smooth white powder coat or brushed stainless steel with covered door tracks
ジョイントタイプ	Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package

Planning a Automatic Sliding-Door Cleanroom Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する