Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Ducha de aire de sala limpia automática corredera
A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.
- Touch-Free Sliding Doors
- Presence Detection
- Anti-Pinch Protection
- Hands-Free Gowned Access
Introducción del producto
This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.
Características clave
Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.
Safety beams can stop or reverse the door if the clear opening is obstructed.
Closed-position feedback prevents the cleaning cycle from beginning too early.
Covered guides keep mechanical components away from the clean floor surface.
Preocupaciones del producto del cliente
Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.
Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.
A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.
The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.
Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.
Aplicaciones típicas
Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms
Parámetros técnicos
Typical values for a sensor-operated sliding-door air shower are listed below.
| Materiales Core | Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles |
|---|---|
| Panel de espesor | 50 mm insulated wall and roof panels |
| Ancho efectivo | 900-1400 mm clear automatic doorway width |
| Longitud máxima | Up to 3000 mm chamber and door-pocket length |
| Acero frente a espesor | 1.0-1.2 mm body facing with reinforced operator support rail |
| Densidad Core | 40-50 kg/m³ rigid polyurethane or composite insulation |
| Conductividad térmica | 0.024-0.031 W/(m·K) for the insulated enclosure panel |
| Superficie acabada | Smooth white powder coat or brushed stainless steel with covered door tracks |
| Tipo conjunto | Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package
Planning a Automatic Sliding-Door Cleanroom Air Shower specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
