Three-quarter view of an automatic sliding-door cleanroom air shower

인력 및 재료 오염 제거 장비

자동 슬라이딩 도어 클린룸 에어 샤워기

A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.

Touch-Free Sliding Doors
Presence Detection
Anti-Pinch Protection
Hands-Free Gowned Access

견적 요청 제품 찾아보기

상품 소개

This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.

주요 기능

Presence sensing can initiate a hands-free entry sequence.

Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.

Safety beams can stop or reverse the door if the clear opening is obstructed.

Closed-position feedback prevents the cleaning cycle from beginning too early.

Covered guides keep mechanical components away from the clean floor surface.

고객 제품 관심사

Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.

Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.

A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.

The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.

Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.

일반적인 응용 프로그램

Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms

기술 매개변수

Typical values for a sensor-operated sliding-door air shower are listed below.

핵심 재료	Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles
패널 두께	50 mm insulated wall and roof panels
유효 폭	900-1400 mm clear automatic doorway width
최대 길이	Up to 3000 mm chamber and door-pocket length
강철 면면 두께	1.0-1.2 mm body facing with reinforced operator support rail
코어 밀도	40-50 kg/m³ rigid polyurethane or composite insulation
열전도도 (Thermal Conductivity)	0.024-0.031 W/(m·K) for the insulated enclosure panel
표면 마무리	Smooth white powder coat or brushed stainless steel with covered door tracks
접합 유형	Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package

Planning a Automatic Sliding-Door Cleanroom Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.