Three-quarter view of an automatic sliding-door cleanroom air shower

Personel ve Malzeme Dekontaminasyon Ekipmanları

Otomatik Kaydırma Kapısı Temiz Oda Hava Duş

A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.

Touch-Free Sliding Doors
Presence Detection
Anti-Pinch Protection
Hands-Free Gowned Access

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.

Ana Özellikler

Presence sensing can initiate a hands-free entry sequence.

Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.

Safety beams can stop or reverse the door if the clear opening is obstructed.

Closed-position feedback prevents the cleaning cycle from beginning too early.

Covered guides keep mechanical components away from the clean floor surface.

Müşteri Ürün Sorunları

Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.

Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.

A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.

The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.

Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.

Tipik uygulamalar

Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms

Teknik parametreler

Typical values for a sensor-operated sliding-door air shower are listed below.

Temel malzemeler	Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles
Panel kalınlığı	50 mm insulated wall and roof panels
Effective Width (Etkili Genişlik)	900-1400 mm clear automatic doorway width
Maksimum uzunluk	Up to 3000 mm chamber and door-pocket length
Çelik yüz yüze kalınlığı	1.0-1.2 mm body facing with reinforced operator support rail
Core Density (Çekirdek Yoğunluğu)	40-50 kg/m³ rigid polyurethane or composite insulation
Termal İletkenlik	0.024-0.031 W/(m·K) for the insulated enclosure panel
Yüzey bitirme	Smooth white powder coat or brushed stainless steel with covered door tracks
Ortak tip	Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package

Planning a Automatic Sliding-Door Cleanroom Air Shower specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun