Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
A Douche à air automatique à porte coulissante salle blanche
A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.
- Touch-Free Sliding Doors
- Presence Detection
- Anti-Pinch Protection
- Hands-Free Gowned Access
Introduction de produit
This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.
Key Features
Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.
Safety beams can stop or reverse the door if the clear opening is obstructed.
Closed-position feedback prevents the cleaning cycle from beginning too early.
Covered guides keep mechanical components away from the clean floor surface.
Préoccupations du client produit
Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.
Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.
A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.
The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.
Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.
Les applications typiques
Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms
Paramètres techniques
Typical values for a sensor-operated sliding-door air shower are listed below.
| Matériaux de base | Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles |
|---|---|
| Panneau épaisseur | 50 mm insulated wall and roof panels |
| Largeur effective | 900-1400 mm clear automatic doorway width |
| Longueur maximale | Up to 3000 mm chamber and door-pocket length |
| Acier face épaisseur | 1.0-1.2 mm body facing with reinforced operator support rail |
| Densité Core | 40-50 kg/m³ rigid polyurethane or composite insulation |
| Conductivité thermique | 0.024-0.031 W/(m·K) for the insulated enclosure panel |
| surface finie | Smooth white powder coat or brushed stainless steel with covered door tracks |
| Type joint | Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package
Planning a Automatic Sliding-Door Cleanroom Air Shower specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
