Pemasok One-Stop Anda untuk Peralatan Cleanroom dan Fasilitas Aseptik EsensialDukungan proyek internasional
Open mobile navigationClose mobile navigation
Beranda / Produk / Peralatan Dekontaminasi Personil dan Bahan / Automatic Sliding-Door Cleanroom Air Shower
Peralatan Dekontaminasi Personil dan Bahan

Automatic Sliding-Door Cleanroom Air Shower

A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.
  • Touch-Free Sliding Doors
  • Presence Detection
  • Anti-Pinch Protection
  • Hands-Free Gowned Access
Permintaan untuk kutipan Browse Produk

Perkenalan produk

This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.

Fitur utama:

Presence sensing can initiate a hands-free entry sequence.

Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.

Safety beams can stop or reverse the door if the clear opening is obstructed.

Closed-position feedback prevents the cleaning cycle from beginning too early.

Covered guides keep mechanical components away from the clean floor surface.

Kekhawatiran produk pelanggan

Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.

Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.
A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.
The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.
Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.

Aplikasi yang Tipis

Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms

Parameter teknis

Typical values for a sensor-operated sliding-door air shower are listed below.

Bahan intiInsulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles
Ketebalan Panel (Panel Thickness)50 mm insulated wall and roof panels
Efektif lebar900-1400 mm clear automatic doorway width
Panjang maksimumUp to 3000 mm chamber and door-pocket length
Baja menghadap ketebalan1.0-1.2 mm body facing with reinforced operator support rail
Kepadatan inti (core density)40-50 kg/m³ rigid polyurethane or composite insulation
Konduktivitas Termal (Thermal Conductivity)0.024-0.031 W/(m·K) for the insulated enclosure panel
Permukaan selesaiSmooth white powder coat or brushed stainless steel with covered door tracks
Jenis BersamaFlush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals
Customization (Kustomisasi)Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package

Planning a Automatic Sliding-Door Cleanroom Air Shower specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami
Email Kami WhatsApp WhatsApp WhatsApp WhatsApp WeChat adalah

Beranda

Produk

Berita

Tentang Kami

Hubungi Kami