Three-quarter view of an automatic sliding-door cleanroom air shower

Персонал и оборудование для дезактивации материалов

Автоматический подвижной двери воздушный душ в чистой комнате

A hands-free personnel air shower with powered sliding doors that coordinate opening, closing and the cleaning cycle through presence and safety sensors.

Touch-Free Sliding Doors
Presence Detection
Anti-Pinch Protection
Hands-Free Gowned Access

Запрос котировки Просмотреть продукты

Введение продукции

This air shower eliminates the need for gowned personnel to touch a door handle. A presence sensor opens the entry leaf, then door-closed and lock signals allow the airflow cycle to begin. After cleaning, the clean-side sliding door opens through the programmed sequence. Top-hung movement avoids the floor swing clearance and lower track contamination associated with conventional hinged doors.

Основные характеристики

Presence sensing can initiate a hands-free entry sequence.

Sliding leaves preserve aisle space that would otherwise be used by door swing arcs.

Safety beams can stop or reverse the door if the clear opening is obstructed.

Closed-position feedback prevents the cleaning cycle from beginning too early.

Covered guides keep mechanical components away from the clean floor surface.

Обеспокоенность клиентов продуктами

Automatic doors must reduce touch points without allowing a fan cycle to start before the opening is safely closed.

Gloved users repeatedly touch manual handles.Presence sensors and powered sliding leaves allow hands-free operation.

A moving door can meet a person or trolley in the opening.Anti-pinch sensing monitors the aperture and commands a stop or reversal when obstructed.

The fan may start before the leaf is sealed.Door-closed and lock feedback are both required before blower operation is enabled.

Floor tracks collect debris and complicate cleaning.A top-hung operator with a covered guide reduces exposed floor-level hardware.

Типичные приложения

Hands-free pharmaceutical gowningHospital sterile productionFood hygiene entrancesHigh-traffic electronics cleanrooms

Технические параметры

Typical values for a sensor-operated sliding-door air shower are listed below.

Основной материал	Insulated steel or SUS 304 enclosure with H13 HEPA airflow circuit, powered door operators and stainless directional nozzles
Толщина панели	50 mm insulated wall and roof panels
эффективная ширина	900-1400 mm clear automatic doorway width
Максимальная длина	Up to 3000 mm chamber and door-pocket length
Толщина линий стали	1.0-1.2 mm body facing with reinforced operator support rail
Плотность ядра	40-50 kg/m³ rigid polyurethane or composite insulation
Теплопроводимость	0.024-0.031 W/(m·K) for the insulated enclosure panel
Поверхностная отделка	Smooth white powder coat or brushed stainless steel with covered door tracks
Объединенный тип	Flush gasketed enclosure seams with top-hung sliding leaves and monitored closing seals
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Single or bi-parting leavesMicrowave or infrared sensorCard-reader integrationEmergency door-release package

Planning a Automatic Sliding-Door Cleanroom Air Shower specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой