Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Ducheiro de ar porta mais fechada
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
Introdução do produto
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
Características-chave
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
Preocupações do produto do cliente
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
Aplicações típicas
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
Parâmetros técnicos
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| Material principal | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| Painel de espessura | 35-60 mm nominal closer-body depth |
| Largura efetiva | 45-80 mm nominal closer-body height |
| Comprimento máximo | Up to 320 mm closer-body length excluding arm |
| Aço enfrentando espessura | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| Densidade Core | 2700 kg/m³ for aluminum housing components |
| Condutividade térmica | 160-205 W/(m·K) for aluminum housing components |
| Superfície acabado | Satin silver anodized or coated body and articulated arm |
| Tipo conjunto | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
