Three-quarter view of a hydraulic air shower door closer with articulated arm

클린룸 장비 예비 부품

공기 샤워 도어 클로저

A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.

Controlled Hydraulic Closing
Adjustable Closing Speeds
Articulated Two-Piece Arm
Compact Surface Mounting

견적 요청 제품 찾아보기

상품 소개

The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.

주요 기능

Hydraulic damping moderates door movement through the closing cycle.

Separate adjustment valves allow sweep and final-latch behavior to be balanced.

The two-segment arm accommodates common surface-mounted door and frame geometry.

A compact silver housing integrates visually with stainless or coated air shower doors.

고객 제품 관심사

A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.

An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.

A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.

Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.

Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.

일반적인 응용 프로그램

Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance

기술 매개변수

Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.

핵심 재료	Aluminum closer body with steel spring, hydraulic piston and articulated arm
패널 두께	35-60 mm nominal closer-body depth
유효 폭	45-80 mm nominal closer-body height
최대 길이	Up to 320 mm closer-body length excluding arm
강철 면면 두께	2.0-4.0 mm nominal arm and frame-shoe section thickness
코어 밀도	2700 kg/m³ for aluminum housing components
열전도도 (Thermal Conductivity)	160-205 W/(m·K) for aluminum housing components
표면 마무리	Satin silver anodized or coated body and articulated arm
접합 유형	Hydraulic spindle with two-segment pivot arm and two-hole frame shoe
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish

Planning a Air Shower Door Closer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.