English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Воздушный душ дверь закрывает
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
Введение продукции
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
Основные характеристики
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
Обеспокоенность клиентов продуктами
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
Типичные приложения
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
Технические параметры
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| Основной материал | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| Толщина панели | 35-60 mm nominal closer-body depth |
| эффективная ширина | 45-80 mm nominal closer-body height |
| Максимальная длина | Up to 320 mm closer-body length excluding arm |
| Толщина линий стали | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| Плотность ядра | 2700 kg/m³ for aluminum housing components |
| Теплопроводимость | 160-205 W/(m·K) for aluminum housing components |
| Поверхностная отделка | Satin silver anodized or coated body and articulated arm |
| Объединенный тип | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
