English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
غرف الأبحاث معدات قطع الغيار
Air دش الباب أقرب
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
مقدمة المنتج
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
الخصائص الرئيسية
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
مخاوف المنتج للعملاء
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
تطبيقات نموذجية
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
المعلمات الفنية
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| المواد الأساسية | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| سمك اللوحة | 35-60 mm nominal closer-body depth |
| العرض الفعال | 45-80 mm nominal closer-body height |
| الحد الأقصى الطول | Up to 320 mm closer-body length excluding arm |
| الصلب يواجه سمك | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| الكثافة الأساسية | 2700 kg/m³ for aluminum housing components |
| الموصلية الحرارية | 160-205 W/(m·K) for aluminum housing components |
| إنهاء السطح | Satin silver anodized or coated body and articulated arm |
| نوع المشترك | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
