İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Ekipmanları Yedek Parçaları
Hava Duş Kapısı Kapı
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
Ürün tanıtımı
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
Ana Özellikler
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
Müşteri Ürün Sorunları
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
Tipik uygulamalar
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
Teknik parametreler
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| Temel malzemeler | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| Panel kalınlığı | 35-60 mm nominal closer-body depth |
| Effective Width (Etkili Genişlik) | 45-80 mm nominal closer-body height |
| Maksimum uzunluk | Up to 320 mm closer-body length excluding arm |
| Çelik yüz yüze kalınlığı | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| Core Density (Çekirdek Yoğunluğu) | 2700 kg/m³ for aluminum housing components |
| Termal İletkenlik | 160-205 W/(m·K) for aluminum housing components |
| Yüzey bitirme | Satin silver anodized or coated body and articulated arm |
| Ortak tip | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
