Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom équipement pièces de rechange
Air Douche porte plus proche
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
Introduction de produit
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
Key Features
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
Préoccupations du client produit
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
Les applications typiques
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
Paramètres techniques
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| Matériaux de base | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| Panneau épaisseur | 35-60 mm nominal closer-body depth |
| Largeur effective | 45-80 mm nominal closer-body height |
| Longueur maximale | Up to 320 mm closer-body length excluding arm |
| Acier face épaisseur | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| Densité Core | 2700 kg/m³ for aluminum housing components |
| Conductivité thermique | 160-205 W/(m·K) for aluminum housing components |
| surface finie | Satin silver anodized or coated body and articulated arm |
| Type joint | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
