Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Ducha de aire puerta más cerrada
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
Introducción del producto
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
Características clave
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
Preocupaciones del producto del cliente
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
Aplicaciones típicas
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
Parámetros técnicos
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| Materiales Core | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| Panel de espesor | 35-60 mm nominal closer-body depth |
| Ancho efectivo | 45-80 mm nominal closer-body height |
| Longitud máxima | Up to 320 mm closer-body length excluding arm |
| Acero frente a espesor | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| Densidad Core | 2700 kg/m³ for aluminum housing components |
| Conductividad térmica | 160-205 W/(m·K) for aluminum housing components |
| Superficie acabada | Satin silver anodized or coated body and articulated arm |
| Tipo conjunto | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
