Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
Luft Dusche Tür schließen
A surface-mounted hydraulic closer that returns an air shower door smoothly and consistently for reliable interlock operation.
- Controlled Hydraulic Closing
- Adjustable Closing Speeds
- Articulated Two-Piece Arm
- Compact Surface Mounting
Produkteinführung
The air shower door closer uses a spring-loaded hydraulic body and articulated arm to return the door after each passage. Controlled sweep and latch stages reduce slamming while helping the door reach the closed position required by the interlock sensor. The aluminum body and arm suit frequent cycles in personnel and material entry systems. Correct replacement selection should consider door width and mass, opening direction, mounting geometry, closing force and adjustment access.
Key Features
Separate adjustment valves allow sweep and final-latch behavior to be balanced.
The two-segment arm accommodates common surface-mounted door and frame geometry.
A compact silver housing integrates visually with stainless or coated air shower doors.
Kunden Produktbedenken
A closer must shut the door positively enough for the interlock while avoiding impact that can disturb seals or hardware.
An uncontrolled door slams and accelerates wear on seals and locks.Hydraulic damping provides a smoother, adjustable closing motion.
A weak final movement leaves the door sensor or magnetic lock unengaged.The latch-stage setting can provide a positive final approach to the frame.
Incorrect arm geometry limits opening travel or binds at the frame.Body, spindle, arm and shoe dimensions are matched to the available mounting arrangement.
Frequent cycles loosen poorly supported closer hardware.Rigid body and shoe mounting distribute the operating load across the door and frame.
Typische Anwendungen
Personnel air shower swing doorsMaterial air shower access doorsCleanroom vestibule doorsAir shower closer replacement and maintenance
Technische Parameter
Typical construction and dimensional ranges for surface-mounted air shower hydraulic closers are shown below.
| Core Material | Aluminum closer body with steel spring, hydraulic piston and articulated arm |
|---|---|
| Panel Dicke | 35-60 mm nominal closer-body depth |
| Effektive Breite | 45-80 mm nominal closer-body height |
| Maximale Länge | Up to 320 mm closer-body length excluding arm |
| Stahl facing Dicke | 2.0-4.0 mm nominal arm and frame-shoe section thickness |
| Kerndichte | 2700 kg/m³ for aluminum housing components |
| Thermische Leitfähigkeit | 160-205 W/(m·K) for aluminum housing components |
| Oberfläche Finish | Satin silver anodized or coated body and articulated arm |
| Gemeinsamer Typ | Hydraulic spindle with two-segment pivot arm and two-hole frame shoe |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Matched closing-force rangeLeft- or right-hand mountingAlternative arm geometrySilver or black surface finish
Planning a Air Shower Door Closer specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
