EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Wall and Ceiling Systems
Single-Glazed Cleanroom Partition
A room-height partition formed from 12 mm toughened safety glass in a slim aluminum perimeter frame, designed to add visibility and borrowed light without the bulk of a twin-pane wall.
- 12 mm Toughened Safety Glass
- Room-Height Transparent Wall
- Slim 50 mm Glazing Frame
- Silicone-Sealed Glass Edges
Product Introduction
Single-Glazed Cleanroom Partitions combine one thick safety-glass pane with a profiled aluminum frame that connects directly to adjacent modular wall panels. Replaceable snap-on covers retain the pane, and clear silicone closes the perimeter and glass-to-glass joints. The resulting partition has fewer layers and a narrower visual profile than double glazing, making it suitable where teams need open sightlines and daylight but do not require an enclosed inter-pane cavity.
Key Features
Toughened glass provides higher impact tolerance than ordinary annealed glazing.
Slim framing increases the transparent area within each wall module.
Snap-on retaining covers allow damaged glass to be changed without replacing neighboring panels.
Silicone perimeter seals close narrow ledges that would otherwise collect dust.
Customer Product Concerns
Buyers assess safety-glass selection, deflection at full height, edge cleanability and replacement access.
Ordinary thin glazing may flex excessively in a tall cleanroom wall.A 12 mm toughened pane and four-sided aluminum frame create a stiffer room-height module.
Wide mullions interrupt supervision and reduce natural light between rooms.The slim glazing frame leaves most of the module transparent while retaining the pane perimeter.
Exposed glazing beads and rough silicone lines become difficult-to-wipe edges.Snap-on covers and controlled sealant joints form a continuous cleanable border.
Replacing a broken pane can disturb an entire fixed glass wall.Removable retaining profiles give direct access to the affected glass module.
Typical Applications
Electronics production viewing wallsResearch laboratory partitionsMedical-device assembly suitesClean manufacturing visitor corridorsQuality-control and inspection rooms
Technical Parameters
Typical dimensions for a framed single-glazed cleanroom wall are shown below.
| Core Material | N/A — single 12 mm toughened safety-glass pane |
|---|---|
| Panel Thickness | 50 mm glazing-frame depth |
| Effective Width | 1200 mm standard module |
| Maximum Length | 3000 mm maximum partition height |
| Steel Facing Thickness | N/A — glazed partition has no steel facing |
| Core Density | N/A — monolithic glass construction has no cellular core |
| Thermal Conductivity | N/A — single glazing is selected for visibility rather than thermal insulation |
| Surface Finish | Clear, frosted or tinted 12 mm toughened glass with powder-coated aluminum frame |
| Joint Type | Clear silicone glass joint within four-sided aluminum frame and 30 × 33 mm wall connector |
| Customization | Available based on the intended application and operating environment |
Available Options
Frosted privacy glassTinted safety glassLow-UV glazing filmPrinted manifestation or custom graphics
Planning a Single-Glazed Cleanroom Partition specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
