English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
قسم غرفة نظيفة زجاجية واحدة
A room-height partition formed from 12 mm toughened safety glass in a slim aluminum perimeter frame, designed to add visibility and borrowed light without the bulk of a twin-pane wall.
- 12 mm Toughened Safety Glass
- Room-Height Transparent Wall
- Slim 50 mm Glazing Frame
- Silicone-Sealed Glass Edges
مقدمة المنتج
Single-Glazed Cleanroom Partitions combine one thick safety-glass pane with a profiled aluminum frame that connects directly to adjacent modular wall panels. Replaceable snap-on covers retain the pane, and clear silicone closes the perimeter and glass-to-glass joints. The resulting partition has fewer layers and a narrower visual profile than double glazing, making it suitable where teams need open sightlines and daylight but do not require an enclosed inter-pane cavity.
الخصائص الرئيسية
Toughened glass provides higher impact tolerance than ordinary annealed glazing.
Slim framing increases the transparent area within each wall module.
Snap-on retaining covers allow damaged glass to be changed without replacing neighboring panels.
Silicone perimeter seals close narrow ledges that would otherwise collect dust.
مخاوف المنتج للعملاء
Buyers assess safety-glass selection, deflection at full height, edge cleanability and replacement access.
Ordinary thin glazing may flex excessively in a tall cleanroom wall.A 12 mm toughened pane and four-sided aluminum frame create a stiffer room-height module.
Wide mullions interrupt supervision and reduce natural light between rooms.The slim glazing frame leaves most of the module transparent while retaining the pane perimeter.
Exposed glazing beads and rough silicone lines become difficult-to-wipe edges.Snap-on covers and controlled sealant joints form a continuous cleanable border.
Replacing a broken pane can disturb an entire fixed glass wall.Removable retaining profiles give direct access to the affected glass module.
تطبيقات نموذجية
Electronics production viewing wallsResearch laboratory partitionsMedical-device assembly suitesClean manufacturing visitor corridorsQuality-control and inspection rooms
المعلمات الفنية
Typical dimensions for a framed single-glazed cleanroom wall are shown below.
| المواد الأساسية | N/A — single 12 mm toughened safety-glass pane |
|---|---|
| سمك اللوحة | 50 mm glazing-frame depth |
| العرض الفعال | 1200 mm standard module |
| الحد الأقصى الطول | 3000 mm maximum partition height |
| الصلب يواجه سمك | N/A — glazed partition has no steel facing |
| الكثافة الأساسية | N/A — monolithic glass construction has no cellular core |
| الموصلية الحرارية | N/A — single glazing is selected for visibility rather than thermal insulation |
| إنهاء السطح | Clear, frosted or tinted 12 mm toughened glass with powder-coated aluminum frame |
| نوع المشترك | Clear silicone glass joint within four-sided aluminum frame and 30 × 33 mm wall connector |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Frosted privacy glassTinted safety glassLow-UV glazing filmPrinted manifestation or custom graphics
Planning a Single-Glazed Cleanroom Partition specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
