Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Partição Cleanroom Single-Glass
A room-height partition formed from 12 mm toughened safety glass in a slim aluminum perimeter frame, designed to add visibility and borrowed light without the bulk of a twin-pane wall.
- 12 mm Toughened Safety Glass
- Room-Height Transparent Wall
- Slim 50 mm Glazing Frame
- Silicone-Sealed Glass Edges
Introdução do produto
Single-Glazed Cleanroom Partitions combine one thick safety-glass pane with a profiled aluminum frame that connects directly to adjacent modular wall panels. Replaceable snap-on covers retain the pane, and clear silicone closes the perimeter and glass-to-glass joints. The resulting partition has fewer layers and a narrower visual profile than double glazing, making it suitable where teams need open sightlines and daylight but do not require an enclosed inter-pane cavity.
Características-chave
Toughened glass provides higher impact tolerance than ordinary annealed glazing.
Slim framing increases the transparent area within each wall module.
Snap-on retaining covers allow damaged glass to be changed without replacing neighboring panels.
Silicone perimeter seals close narrow ledges that would otherwise collect dust.
Preocupações do produto do cliente
Buyers assess safety-glass selection, deflection at full height, edge cleanability and replacement access.
Ordinary thin glazing may flex excessively in a tall cleanroom wall.A 12 mm toughened pane and four-sided aluminum frame create a stiffer room-height module.
Wide mullions interrupt supervision and reduce natural light between rooms.The slim glazing frame leaves most of the module transparent while retaining the pane perimeter.
Exposed glazing beads and rough silicone lines become difficult-to-wipe edges.Snap-on covers and controlled sealant joints form a continuous cleanable border.
Replacing a broken pane can disturb an entire fixed glass wall.Removable retaining profiles give direct access to the affected glass module.
Aplicações típicas
Electronics production viewing wallsResearch laboratory partitionsMedical-device assembly suitesClean manufacturing visitor corridorsQuality-control and inspection rooms
Parâmetros técnicos
Typical dimensions for a framed single-glazed cleanroom wall are shown below.
| Material principal | N/A — single 12 mm toughened safety-glass pane |
|---|---|
| Painel de espessura | 50 mm glazing-frame depth |
| Largura efetiva | 1200 mm standard module |
| Comprimento máximo | 3000 mm maximum partition height |
| Aço enfrentando espessura | N/A — glazed partition has no steel facing |
| Densidade Core | N/A — monolithic glass construction has no cellular core |
| Condutividade térmica | N/A — single glazing is selected for visibility rather than thermal insulation |
| Superfície acabado | Clear, frosted or tinted 12 mm toughened glass with powder-coated aluminum frame |
| Tipo conjunto | Clear silicone glass joint within four-sided aluminum frame and 30 × 33 mm wall connector |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Frosted privacy glassTinted safety glassLow-UV glazing filmPrinted manifestation or custom graphics
Planning a Single-Glazed Cleanroom Partition specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
