Complete single-glazed cleanroom partition in a slim aluminum frame

Стенные и потолочные системы для чистых комнат

Одностеклянная перегородка чистой комнаты

A room-height partition formed from 12 mm toughened safety glass in a slim aluminum perimeter frame, designed to add visibility and borrowed light without the bulk of a twin-pane wall.

12 mm Toughened Safety Glass
Room-Height Transparent Wall
Slim 50 mm Glazing Frame
Silicone-Sealed Glass Edges

Запрос котировки Просмотреть продукты

Введение продукции

Single-Glazed Cleanroom Partitions combine one thick safety-glass pane with a profiled aluminum frame that connects directly to adjacent modular wall panels. Replaceable snap-on covers retain the pane, and clear silicone closes the perimeter and glass-to-glass joints. The resulting partition has fewer layers and a narrower visual profile than double glazing, making it suitable where teams need open sightlines and daylight but do not require an enclosed inter-pane cavity.

Основные характеристики

A single uninterrupted pane preserves clear views across production and circulation areas.

Toughened glass provides higher impact tolerance than ordinary annealed glazing.

Slim framing increases the transparent area within each wall module.

Snap-on retaining covers allow damaged glass to be changed without replacing neighboring panels.

Silicone perimeter seals close narrow ledges that would otherwise collect dust.

Обеспокоенность клиентов продуктами

Buyers assess safety-glass selection, deflection at full height, edge cleanability and replacement access.

Ordinary thin glazing may flex excessively in a tall cleanroom wall.A 12 mm toughened pane and four-sided aluminum frame create a stiffer room-height module.

Wide mullions interrupt supervision and reduce natural light between rooms.The slim glazing frame leaves most of the module transparent while retaining the pane perimeter.

Exposed glazing beads and rough silicone lines become difficult-to-wipe edges.Snap-on covers and controlled sealant joints form a continuous cleanable border.

Replacing a broken pane can disturb an entire fixed glass wall.Removable retaining profiles give direct access to the affected glass module.

Типичные приложения

Electronics production viewing wallsResearch laboratory partitionsMedical-device assembly suitesClean manufacturing visitor corridorsQuality-control and inspection rooms

Технические параметры

Typical dimensions for a framed single-glazed cleanroom wall are shown below.

Основной материал	N/A — single 12 mm toughened safety-glass pane
Толщина панели	50 mm glazing-frame depth
эффективная ширина	1200 mm standard module
Максимальная длина	3000 mm maximum partition height
Толщина линий стали	N/A — glazed partition has no steel facing
Плотность ядра	N/A — monolithic glass construction has no cellular core
Теплопроводимость	N/A — single glazing is selected for visibility rather than thermal insulation
Поверхностная отделка	Clear, frosted or tinted 12 mm toughened glass with powder-coated aluminum frame
Объединенный тип	Clear silicone glass joint within four-sided aluminum frame and 30 × 33 mm wall connector
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Frosted privacy glassTinted safety glassLow-UV glazing filmPrinted manifestation or custom graphics

Planning a Single-Glazed Cleanroom Partition specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой