English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
Wafer تخزين مجلس الوزراء
A sealed multi-chamber cabinet that stores wafer boxes in a clean, dry and visible environment with configurable nitrogen purge control.
- Sealed Wafer Storage
- Controlled Nitrogen Purge
- Independent Clear Chambers
- 200 mm and 300 mm Compatibility
مقدمة المنتج
The wafer storage cabinet is arranged around sealed transparent compartments, adjustable shelves and a common dry-gas distribution system. Each chamber provides direct visual inventory checking while limiting the exposure of other stored lots when one door is opened. Stainless steel door frames, compression latches and cleanable internal surfaces support semiconductor storage areas where moisture, particles and handling discipline must be controlled.
الخصائص الرئيسية
A distribution plenum delivers dry nitrogen to the cabinet through controlled inlet connections.
Transparent static-dissipative panel options improve visibility while supporting electrostatic-control practices.
Adjustable shelves accommodate common 200 mm and 300 mm wafer lot-box formats.
مخاوف المنتج للعملاء
Stored wafer lots need protection from ambient humidity and particles without making identification or retrieval unnecessarily difficult.
Opening a large shared cabinet exposes every stored lot to room air.Individually sealed compartments isolate the accessed wafer box from adjacent storage positions.
Uneven purge flow leaves some cabinet areas slower to reach the required humidity.A dedicated distribution plenum and chamber inlets promote consistent dry-gas delivery.
Operators cannot confirm inventory without repeatedly opening opaque doors.Clear chamber panels allow rapid visual checks while the compartment remains closed.
Fixed shelf spacing wastes capacity when wafer-box formats change.Adjustable clean shelves can be positioned around the selected 200 mm or 300 mm containers.
تطبيقات نموذجية
Semiconductor wafer lot bufferingPre-process wafer box storageMetrology and inspection areasDry storage between fabrication steps
المعلمات الفنية
Typical construction values for a multi-chamber wafer storage cabinet are shown below.
| المواد الأساسية | 304 stainless steel frame with clear acrylic or static-dissipative PVC chamber panels |
|---|---|
| سمك اللوحة | 6-10 mm transparent chamber panels |
| العرض الفعال | 500-1400 mm cabinet width |
| الحد الأقصى الطول | Up to 2200 mm cabinet height |
| الصلب يواجه سمك | 1.0-1.5 mm stainless steel frame and base panels |
| الكثافة الأساسية | 1180-1420 kg/m³ for polymer panels and 7850-8000 kg/m³ for stainless components |
| الموصلية الحرارية | 0.19-0.21 W/(m·K) for clear acrylic panels |
| إنهاء السطح | Clear polished chamber panels with brushed stainless steel frames and shelves |
| نوع المشترك | Gasketed hinged chamber doors with compression latches and plenum-fed purge connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Static-dissipative PVC chambersAutomatic humidity controllerIndependent chamber flow adjustmentWafer-box-specific shelf layouts
Planning a Wafer Storage Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
