English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
O استشعار الأكسجين
A fixed electrochemical oxygen monitor that warns of oxygen depletion or enrichment near inert-gas and process-gas use areas.
- Electrochemical O₂ Measurement
- Local Concentration Display
- Dual Alarm Relays
- Replaceable Sensor Cell
مقدمة المنتج
The oxygen depletion sensor continuously samples surrounding air through a protected diffusion cap. An electrochemical cell produces a signal proportional to oxygen partial pressure, and internal electronics display the concentration and compare it with independent alarm thresholds. Local sounder and beacon functions can be supplemented by relay, current or digital outputs to a central alarm system. The replaceable cell and accessible calibration interface support planned maintenance without replacing the wall-mounted transmitter body.
الخصائص الرئيسية
A bright local display shows oxygen concentration before and during an alarm condition.
Separate low and high alarm thresholds address depletion and enrichment risks.
Replaceable sensing cells extend transmitter service life and simplify maintenance planning.
مخاوف المنتج للعملاء
Oxygen hazards can develop without odor or visible warning, so room coverage, alarm visibility and sensor maintenance must be deliberate.
Inert-gas leakage displaces oxygen without giving occupants a sensory warning.Continuous oxygen measurement activates visible and audible alarms before entry or exposure continues.
A sensor mounted too high misses heavier or poorly mixed displacement patterns.Risk-based mounting positions place detectors near credible gas accumulation and breathing zones.
An aged electrochemical cell loses response gradually.Planned bump checks, calibration and replaceable cells maintain response confidence.
A local alarm is not seen from outside the room.Relay and network outputs drive corridor beacons, central annunciation and ventilation actions.
تطبيقات نموذجية
Nitrogen-supplied cleanroomsCryogenic storage support areasGas cabinet roomsLaboratory inert-gas zones
المعلمات الفنية
Typical construction values for a fixed oxygen depletion sensor are listed below.
| المواد الأساسية | Replaceable electrochemical oxygen cell in polycarbonate transmitter with stainless protective sensor guard |
|---|---|
| سمك اللوحة | 55-90 mm detector depth |
| العرض الفعال | 110-180 mm housing width |
| الحد الأقصى الطول | Up to 240 mm detector height |
| الصلب يواجه سمك | 0.5-1.0 mm stainless sensor guard |
| الكثافة الأساسية | 1180-1220 kg/m³ for polycarbonate transmitter body |
| الموصلية الحرارية | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| إنهاء السطح | White or safety-yellow housing with black display, green normal light and red alarm beacon |
| نوع المشترك | Wall-mount base with diffusion sensor cap, cable gland and removable alarm terminals |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Local sounder and beaconLow and high oxygen alarmsAnalog and relay outputsRemote corridor indicator
Planning a Oxygen Sensor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
