İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Oksijen Sensörü
A fixed electrochemical oxygen monitor that warns of oxygen depletion or enrichment near inert-gas and process-gas use areas.
- Electrochemical O₂ Measurement
- Local Concentration Display
- Dual Alarm Relays
- Replaceable Sensor Cell
Ürün tanıtımı
The oxygen depletion sensor continuously samples surrounding air through a protected diffusion cap. An electrochemical cell produces a signal proportional to oxygen partial pressure, and internal electronics display the concentration and compare it with independent alarm thresholds. Local sounder and beacon functions can be supplemented by relay, current or digital outputs to a central alarm system. The replaceable cell and accessible calibration interface support planned maintenance without replacing the wall-mounted transmitter body.
Ana Özellikler
A bright local display shows oxygen concentration before and during an alarm condition.
Separate low and high alarm thresholds address depletion and enrichment risks.
Replaceable sensing cells extend transmitter service life and simplify maintenance planning.
Müşteri Ürün Sorunları
Oxygen hazards can develop without odor or visible warning, so room coverage, alarm visibility and sensor maintenance must be deliberate.
Inert-gas leakage displaces oxygen without giving occupants a sensory warning.Continuous oxygen measurement activates visible and audible alarms before entry or exposure continues.
A sensor mounted too high misses heavier or poorly mixed displacement patterns.Risk-based mounting positions place detectors near credible gas accumulation and breathing zones.
An aged electrochemical cell loses response gradually.Planned bump checks, calibration and replaceable cells maintain response confidence.
A local alarm is not seen from outside the room.Relay and network outputs drive corridor beacons, central annunciation and ventilation actions.
Tipik uygulamalar
Nitrogen-supplied cleanroomsCryogenic storage support areasGas cabinet roomsLaboratory inert-gas zones
Teknik parametreler
Typical construction values for a fixed oxygen depletion sensor are listed below.
| Temel malzemeler | Replaceable electrochemical oxygen cell in polycarbonate transmitter with stainless protective sensor guard |
|---|---|
| Panel kalınlığı | 55-90 mm detector depth |
| Effective Width (Etkili Genişlik) | 110-180 mm housing width |
| Maksimum uzunluk | Up to 240 mm detector height |
| Çelik yüz yüze kalınlığı | 0.5-1.0 mm stainless sensor guard |
| Core Density (Çekirdek Yoğunluğu) | 1180-1220 kg/m³ for polycarbonate transmitter body |
| Termal İletkenlik | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Yüzey bitirme | White or safety-yellow housing with black display, green normal light and red alarm beacon |
| Ortak tip | Wall-mount base with diffusion sensor cap, cable gland and removable alarm terminals |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Local sounder and beaconLow and high oxygen alarmsAnalog and relay outputsRemote corridor indicator
Planning a Oxygen Sensor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
