Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Sensor oksigen (Oxygen Sensor)
A fixed electrochemical oxygen monitor that warns of oxygen depletion or enrichment near inert-gas and process-gas use areas.
- Electrochemical O₂ Measurement
- Local Concentration Display
- Dual Alarm Relays
- Replaceable Sensor Cell
Perkenalan produk
The oxygen depletion sensor continuously samples surrounding air through a protected diffusion cap. An electrochemical cell produces a signal proportional to oxygen partial pressure, and internal electronics display the concentration and compare it with independent alarm thresholds. Local sounder and beacon functions can be supplemented by relay, current or digital outputs to a central alarm system. The replaceable cell and accessible calibration interface support planned maintenance without replacing the wall-mounted transmitter body.
Fitur utama:
A bright local display shows oxygen concentration before and during an alarm condition.
Separate low and high alarm thresholds address depletion and enrichment risks.
Replaceable sensing cells extend transmitter service life and simplify maintenance planning.
Kekhawatiran produk pelanggan
Oxygen hazards can develop without odor or visible warning, so room coverage, alarm visibility and sensor maintenance must be deliberate.
Inert-gas leakage displaces oxygen without giving occupants a sensory warning.Continuous oxygen measurement activates visible and audible alarms before entry or exposure continues.
A sensor mounted too high misses heavier or poorly mixed displacement patterns.Risk-based mounting positions place detectors near credible gas accumulation and breathing zones.
An aged electrochemical cell loses response gradually.Planned bump checks, calibration and replaceable cells maintain response confidence.
A local alarm is not seen from outside the room.Relay and network outputs drive corridor beacons, central annunciation and ventilation actions.
Aplikasi yang Tipis
Nitrogen-supplied cleanroomsCryogenic storage support areasGas cabinet roomsLaboratory inert-gas zones
Parameter teknis
Typical construction values for a fixed oxygen depletion sensor are listed below.
| Bahan inti | Replaceable electrochemical oxygen cell in polycarbonate transmitter with stainless protective sensor guard |
|---|---|
| Ketebalan Panel (Panel Thickness) | 55-90 mm detector depth |
| Efektif lebar | 110-180 mm housing width |
| Panjang maksimum | Up to 240 mm detector height |
| Baja menghadap ketebalan | 0.5-1.0 mm stainless sensor guard |
| Kepadatan inti (core density) | 1180-1220 kg/m³ for polycarbonate transmitter body |
| Konduktivitas Termal (Thermal Conductivity) | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Permukaan selesai | White or safety-yellow housing with black display, green normal light and red alarm beacon |
| Jenis Bersama | Wall-mount base with diffusion sensor cap, cable gland and removable alarm terminals |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Local sounder and beaconLow and high oxygen alarmsAnalog and relay outputsRemote corridor indicator
Planning a Oxygen Sensor specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
