Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumsteuerung und Umweltüberwachungssysteme
Sauerstoff-Sensor
A fixed electrochemical oxygen monitor that warns of oxygen depletion or enrichment near inert-gas and process-gas use areas.
- Electrochemical O₂ Measurement
- Local Concentration Display
- Dual Alarm Relays
- Replaceable Sensor Cell
Produkteinführung
The oxygen depletion sensor continuously samples surrounding air through a protected diffusion cap. An electrochemical cell produces a signal proportional to oxygen partial pressure, and internal electronics display the concentration and compare it with independent alarm thresholds. Local sounder and beacon functions can be supplemented by relay, current or digital outputs to a central alarm system. The replaceable cell and accessible calibration interface support planned maintenance without replacing the wall-mounted transmitter body.
Key Features
A bright local display shows oxygen concentration before and during an alarm condition.
Separate low and high alarm thresholds address depletion and enrichment risks.
Replaceable sensing cells extend transmitter service life and simplify maintenance planning.
Kunden Produktbedenken
Oxygen hazards can develop without odor or visible warning, so room coverage, alarm visibility and sensor maintenance must be deliberate.
Inert-gas leakage displaces oxygen without giving occupants a sensory warning.Continuous oxygen measurement activates visible and audible alarms before entry or exposure continues.
A sensor mounted too high misses heavier or poorly mixed displacement patterns.Risk-based mounting positions place detectors near credible gas accumulation and breathing zones.
An aged electrochemical cell loses response gradually.Planned bump checks, calibration and replaceable cells maintain response confidence.
A local alarm is not seen from outside the room.Relay and network outputs drive corridor beacons, central annunciation and ventilation actions.
Typische Anwendungen
Nitrogen-supplied cleanroomsCryogenic storage support areasGas cabinet roomsLaboratory inert-gas zones
Technische Parameter
Typical construction values for a fixed oxygen depletion sensor are listed below.
| Core Material | Replaceable electrochemical oxygen cell in polycarbonate transmitter with stainless protective sensor guard |
|---|---|
| Panel Dicke | 55-90 mm detector depth |
| Effektive Breite | 110-180 mm housing width |
| Maximale Länge | Up to 240 mm detector height |
| Stahl facing Dicke | 0.5-1.0 mm stainless sensor guard |
| Kerndichte | 1180-1220 kg/m³ for polycarbonate transmitter body |
| Thermische Leitfähigkeit | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Oberfläche Finish | White or safety-yellow housing with black display, green normal light and red alarm beacon |
| Gemeinsamer Typ | Wall-mount base with diffusion sensor cap, cable gland and removable alarm terminals |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Local sounder and beaconLow and high oxygen alarmsAnalog and relay outputsRemote corridor indicator
Planning a Oxygen Sensor specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
