Complete white and safety-yellow oxygen depletion sensor with black display and red alarm beacon

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

산소 센서 Oxygen Sensor

A fixed electrochemical oxygen monitor that warns of oxygen depletion or enrichment near inert-gas and process-gas use areas.

Electrochemical O₂ Measurement
Local Concentration Display
Dual Alarm Relays
Replaceable Sensor Cell

견적 요청 제품 찾아보기

상품 소개

The oxygen depletion sensor continuously samples surrounding air through a protected diffusion cap. An electrochemical cell produces a signal proportional to oxygen partial pressure, and internal electronics display the concentration and compare it with independent alarm thresholds. Local sounder and beacon functions can be supplemented by relay, current or digital outputs to a central alarm system. The replaceable cell and accessible calibration interface support planned maintenance without replacing the wall-mounted transmitter body.

주요 기능

Diffusion-based electrochemical sensing requires no sample pump for normal room monitoring.

A bright local display shows oxygen concentration before and during an alarm condition.

Separate low and high alarm thresholds address depletion and enrichment risks.

Replaceable sensing cells extend transmitter service life and simplify maintenance planning.

고객 제품 관심사

Oxygen hazards can develop without odor or visible warning, so room coverage, alarm visibility and sensor maintenance must be deliberate.

Inert-gas leakage displaces oxygen without giving occupants a sensory warning.Continuous oxygen measurement activates visible and audible alarms before entry or exposure continues.

A sensor mounted too high misses heavier or poorly mixed displacement patterns.Risk-based mounting positions place detectors near credible gas accumulation and breathing zones.

An aged electrochemical cell loses response gradually.Planned bump checks, calibration and replaceable cells maintain response confidence.

A local alarm is not seen from outside the room.Relay and network outputs drive corridor beacons, central annunciation and ventilation actions.

일반적인 응용 프로그램

Nitrogen-supplied cleanroomsCryogenic storage support areasGas cabinet roomsLaboratory inert-gas zones

기술 매개변수

Typical construction values for a fixed oxygen depletion sensor are listed below.

핵심 재료	Replaceable electrochemical oxygen cell in polycarbonate transmitter with stainless protective sensor guard
패널 두께	55-90 mm detector depth
유효 폭	110-180 mm housing width
최대 길이	Up to 240 mm detector height
강철 면면 두께	0.5-1.0 mm stainless sensor guard
코어 밀도	1180-1220 kg/m³ for polycarbonate transmitter body
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate enclosure material
표면 마무리	White or safety-yellow housing with black display, green normal light and red alarm beacon
접합 유형	Wall-mount base with diffusion sensor cap, cable gland and removable alarm terminals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Local sounder and beaconLow and high oxygen alarmsAnalog and relay outputsRemote corridor indicator

Planning a Oxygen Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.