English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة توزيع الهواء في الغرف النظيفة
Dynamic Fire Damper
A thermally released curtain damper with spring-assisted closure for isolating a duct penetration while the ventilation system may still be moving air.
- Spring-Driven Dynamic Closure
- Interlocking Curtain Blades
- Thermal Release Mechanism
- Compact Sleeve Installation
مقدمة المنتج
The dynamic fire damper stores a folded stack of interlocking galvanized blades outside the normal airway. Under ordinary ventilation the curtain is held open by a thermal release. When released, stainless closure springs draw the blade stack across the opening and lock the interlocking folds into the guide channels. A factory sleeve and retaining-angle arrangement positions the damper at the wall or floor penetration while leaving access to the release and blade track for periodic inspection.
الخصائص الرئيسية
Interlocking galvanized blade folds form a continuous closure across the opening after release.
The open blade stack remains outside the clear airway to minimize normal pressure drop.
Sleeve, retaining-angle and access options adapt the damper to common wall and floor penetration details.
مخاوف المنتج للعملاء
A fire damper must be installed square at the protected penetration, retain unobstructed curtain travel and keep its thermal release accessible for inspection.
A static-only curtain may not close reliably against airflow from a fan that remains operating.Closure springs add force to pull the dynamic curtain through the moving airstream.
Mortar, fasteners or a distorted sleeve obstruct the blade guide channels.Specified clearance, protected tracks and square retaining angles preserve the curtain travel path.
The folded blade stack projects into the duct and creates unnecessary pressure loss.An out-of-airway curtain pocket keeps the open blades clear of the normal flow area.
The thermal link cannot be reached after the ceiling is closed.A coordinated access panel exposes the release, blade stack and track for visual and functional checks.
تطبيقات نموذجية
Cleanroom duct fire-compartment penetrationsHospital supply and return ductsLaboratory exhaust boundariesPharmaceutical facility shaftsCommercial HVAC wall and floor openings
المعلمات الفنية
Representative construction ranges for a rectangular spring-assisted curtain fire damper are shown below.
| المواد الأساسية | Interlocking galvanized-steel curtain blades with stainless closure springs and thermal release |
|---|---|
| سمك اللوحة | 0.7–1.0 mm formed interlocking curtain blade sheet |
| العرض الفعال | 152–914 mm nominal single-section clear opening width |
| الحد الأقصى الطول | Up to 1219 mm nominal single-section opening height |
| الصلب يواجه سمك | 1.2–1.5 mm galvanized sleeve, frame and retaining components |
| الكثافة الأساسية | Approximately 7850 kg/m³ for the steel curtain blades |
| الموصلية الحرارية | Approximately 45–55 W/(m·K) for galvanized carbon steel |
| إنهاء السطح | Mill-galvanized curtain, sleeve and frame with corrosion-resistant spring hardware |
| نوع المشترك | Sleeved penetration frame with spring-driven interlocking curtain, side tracks and thermal release |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Vertical wall or horizontal floor orientationThermal release temperature selectionFactory sleeve and retaining anglesOpen-close indication switch
Planning a Dynamic Fire Damper specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
