Three-quarter view of a dynamic curtain fire damper in galvanized sleeve

クリーンルーム空気分配システム

動的な火災ダンパー

A thermally released curtain damper with spring-assisted closure for isolating a duct penetration while the ventilation system may still be moving air.

Spring-Driven Dynamic Closure
Interlocking Curtain Blades
Thermal Release Mechanism
Compact Sleeve Installation

見積もりリクエスト製品案内

商品紹介

The dynamic fire damper stores a folded stack of interlocking galvanized blades outside the normal airway. Under ordinary ventilation the curtain is held open by a thermal release. When released, stainless closure springs draw the blade stack across the opening and lock the interlocking folds into the guide channels. A factory sleeve and retaining-angle arrangement positions the damper at the wall or floor penetration while leaving access to the release and blade track for periodic inspection.

主要な特徴

Spring-assisted curtain travel supplies closing force even when air continues to move through the duct.

Interlocking galvanized blade folds form a continuous closure across the opening after release.

The open blade stack remains outside the clear airway to minimize normal pressure drop.

Sleeve, retaining-angle and access options adapt the damper to common wall and floor penetration details.

お客様の製品に関する懸念事項

A fire damper must be installed square at the protected penetration, retain unobstructed curtain travel and keep its thermal release accessible for inspection.

A static-only curtain may not close reliably against airflow from a fan that remains operating.Closure springs add force to pull the dynamic curtain through the moving airstream.

Mortar, fasteners or a distorted sleeve obstruct the blade guide channels.Specified clearance, protected tracks and square retaining angles preserve the curtain travel path.

The folded blade stack projects into the duct and creates unnecessary pressure loss.An out-of-airway curtain pocket keeps the open blades clear of the normal flow area.

The thermal link cannot be reached after the ceiling is closed.A coordinated access panel exposes the release, blade stack and track for visual and functional checks.

典型的な用途

Cleanroom duct fire-compartment penetrationsHospital supply and return ductsLaboratory exhaust boundariesPharmaceutical facility shaftsCommercial HVAC wall and floor openings

技術的なパラメータ

Representative construction ranges for a rectangular spring-assisted curtain fire damper are shown below.

コア材料	Interlocking galvanized-steel curtain blades with stainless closure springs and thermal release
パネルの厚さ	0.7–1.0 mm formed interlocking curtain blade sheet
有効幅	152–914 mm nominal single-section clear opening width
最大長さ	Up to 1219 mm nominal single-section opening height
鋼鉄の厚さを直面する	1.2–1.5 mm galvanized sleeve, frame and retaining components
コア密度	Approximately 7850 kg/m³ for the steel curtain blades
熱伝導率	Approximately 45–55 W/(m·K) for galvanized carbon steel
表面仕上げ	Mill-galvanized curtain, sleeve and frame with corrosion-resistant spring hardware
ジョイントタイプ	Sleeved penetration frame with spring-driven interlocking curtain, side tracks and thermal release
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Vertical wall or horizontal floor orientationThermal release temperature selectionFactory sleeve and retaining anglesOpen-close indication switch

Planning a Dynamic Fire Damper specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する