English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы распределения воздуха в чистых помещениях
Динамический пожарный амортизатор
A thermally released curtain damper with spring-assisted closure for isolating a duct penetration while the ventilation system may still be moving air.
- Spring-Driven Dynamic Closure
- Interlocking Curtain Blades
- Thermal Release Mechanism
- Compact Sleeve Installation
Введение продукции
The dynamic fire damper stores a folded stack of interlocking galvanized blades outside the normal airway. Under ordinary ventilation the curtain is held open by a thermal release. When released, stainless closure springs draw the blade stack across the opening and lock the interlocking folds into the guide channels. A factory sleeve and retaining-angle arrangement positions the damper at the wall or floor penetration while leaving access to the release and blade track for periodic inspection.
Основные характеристики
Interlocking galvanized blade folds form a continuous closure across the opening after release.
The open blade stack remains outside the clear airway to minimize normal pressure drop.
Sleeve, retaining-angle and access options adapt the damper to common wall and floor penetration details.
Обеспокоенность клиентов продуктами
A fire damper must be installed square at the protected penetration, retain unobstructed curtain travel and keep its thermal release accessible for inspection.
A static-only curtain may not close reliably against airflow from a fan that remains operating.Closure springs add force to pull the dynamic curtain through the moving airstream.
Mortar, fasteners or a distorted sleeve obstruct the blade guide channels.Specified clearance, protected tracks and square retaining angles preserve the curtain travel path.
The folded blade stack projects into the duct and creates unnecessary pressure loss.An out-of-airway curtain pocket keeps the open blades clear of the normal flow area.
The thermal link cannot be reached after the ceiling is closed.A coordinated access panel exposes the release, blade stack and track for visual and functional checks.
Типичные приложения
Cleanroom duct fire-compartment penetrationsHospital supply and return ductsLaboratory exhaust boundariesPharmaceutical facility shaftsCommercial HVAC wall and floor openings
Технические параметры
Representative construction ranges for a rectangular spring-assisted curtain fire damper are shown below.
| Основной материал | Interlocking galvanized-steel curtain blades with stainless closure springs and thermal release |
|---|---|
| Толщина панели | 0.7–1.0 mm formed interlocking curtain blade sheet |
| эффективная ширина | 152–914 mm nominal single-section clear opening width |
| Максимальная длина | Up to 1219 mm nominal single-section opening height |
| Толщина линий стали | 1.2–1.5 mm galvanized sleeve, frame and retaining components |
| Плотность ядра | Approximately 7850 kg/m³ for the steel curtain blades |
| Теплопроводимость | Approximately 45–55 W/(m·K) for galvanized carbon steel |
| Поверхностная отделка | Mill-galvanized curtain, sleeve and frame with corrosion-resistant spring hardware |
| Объединенный тип | Sleeved penetration frame with spring-driven interlocking curtain, side tracks and thermal release |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Vertical wall or horizontal floor orientationThermal release temperature selectionFactory sleeve and retaining anglesOpen-close indication switch
Planning a Dynamic Fire Damper specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
