Three-quarter view of a dynamic curtain fire damper in galvanized sleeve

클린룸 공기 분배 시스템

동적 화재 댐퍼

A thermally released curtain damper with spring-assisted closure for isolating a duct penetration while the ventilation system may still be moving air.

Spring-Driven Dynamic Closure
Interlocking Curtain Blades
Thermal Release Mechanism
Compact Sleeve Installation

견적 요청 제품 찾아보기

상품 소개

The dynamic fire damper stores a folded stack of interlocking galvanized blades outside the normal airway. Under ordinary ventilation the curtain is held open by a thermal release. When released, stainless closure springs draw the blade stack across the opening and lock the interlocking folds into the guide channels. A factory sleeve and retaining-angle arrangement positions the damper at the wall or floor penetration while leaving access to the release and blade track for periodic inspection.

주요 기능

Spring-assisted curtain travel supplies closing force even when air continues to move through the duct.

Interlocking galvanized blade folds form a continuous closure across the opening after release.

The open blade stack remains outside the clear airway to minimize normal pressure drop.

Sleeve, retaining-angle and access options adapt the damper to common wall and floor penetration details.

고객 제품 관심사

A fire damper must be installed square at the protected penetration, retain unobstructed curtain travel and keep its thermal release accessible for inspection.

A static-only curtain may not close reliably against airflow from a fan that remains operating.Closure springs add force to pull the dynamic curtain through the moving airstream.

Mortar, fasteners or a distorted sleeve obstruct the blade guide channels.Specified clearance, protected tracks and square retaining angles preserve the curtain travel path.

The folded blade stack projects into the duct and creates unnecessary pressure loss.An out-of-airway curtain pocket keeps the open blades clear of the normal flow area.

The thermal link cannot be reached after the ceiling is closed.A coordinated access panel exposes the release, blade stack and track for visual and functional checks.

일반적인 응용 프로그램

Cleanroom duct fire-compartment penetrationsHospital supply and return ductsLaboratory exhaust boundariesPharmaceutical facility shaftsCommercial HVAC wall and floor openings

기술 매개변수

Representative construction ranges for a rectangular spring-assisted curtain fire damper are shown below.

핵심 재료	Interlocking galvanized-steel curtain blades with stainless closure springs and thermal release
패널 두께	0.7–1.0 mm formed interlocking curtain blade sheet
유효 폭	152–914 mm nominal single-section clear opening width
최대 길이	Up to 1219 mm nominal single-section opening height
강철 면면 두께	1.2–1.5 mm galvanized sleeve, frame and retaining components
코어 밀도	Approximately 7850 kg/m³ for the steel curtain blades
열전도도 (Thermal Conductivity)	Approximately 45–55 W/(m·K) for galvanized carbon steel
표면 마무리	Mill-galvanized curtain, sleeve and frame with corrosion-resistant spring hardware
접합 유형	Sleeved penetration frame with spring-driven interlocking curtain, side tracks and thermal release
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Vertical wall or horizontal floor orientationThermal release temperature selectionFactory sleeve and retaining anglesOpen-close indication switch

Planning a Dynamic Fire Damper specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.