İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Temiz Oda Laminar Flow Tavanı
A modular ceiling plenum and HEPA filter bank that supplies a broad, uniform low-velocity unidirectional airflow over a protected clean process zone.
- Full-Surface HEPA Supply
- Uniform Low-Velocity Airflow
- Modular Filter Bank
- Integrated Service and Lighting Zones
Ürün tanıtımı
The cleanroom laminar flow ceiling combines a sealed supply plenum, multiple terminal HEPA filters and a continuous perforated or textile diffuser surface above the protected area. Airflow is balanced across several duct inlets and filter cells so the discharge velocity remains even from edge to center. The broad downward field sweeps airborne particles away from an operating table, filling line or open product zone with minimal lateral induction. Bolted modular sections accommodate lighting, service columns and ceiling equipment while maintaining sealed filter and perimeter interfaces.
Ana Özellikler
The continuous diffuser membrane or perforated face straightens local filter jets into a low-turbulence downward field.
Separate inlet plenums and balancing points allow edge and center zones to be equalized independently.
Modular structural frames accept sealed lighting and service openings without breaking the surrounding clean-air surface.
Müşteri Ürün Sorunları
A laminar ceiling must deliver nearly uniform velocity over a large footprint while fitting lights, equipment rails and service penetrations around the protected zone.
Center filters receive more air than edge filters, creating an uneven downward field.Multiple balanced inlets and zoned plenum sections distribute pressure across the full filter bank.
Gaps around lights interrupt the clean-air curtain over the critical work area.Flush sealed lighting modules occupy planned structural bays within the continuous diffuser layout.
A damaged filter cannot be isolated without opening a large common plenum.Individual room-side filter retainers and test points allow each cell to be inspected and replaced separately.
A rigid diffuser face is difficult to remove around suspended medical equipment.Modular perforated panels or tensioned textile sections provide local access without dismantling the whole ceiling.
Tipik uygulamalar
Sterile pharmaceutical filling zonesHastane ameliyat odalarıAseptic product assemblyOpen process protection in biotechnologyPrecision microelectronics work areas
Teknik parametreler
Representative construction and size ranges for a modular HEPA-filtered laminar flow ceiling are shown below.
| Temel malzemeler | Glass-microfiber H14 HEPA filter packs in aluminum frames with polyurethane or gel seals |
|---|---|
| Panel kalınlığı | 0.8–1.2 mm plenum panels and 1.0–2.0 mm structural frame sections |
| Effective Width (Etkili Genişlik) | 1800–3500 mm typical protected ceiling width |
| Maksimum uzunluk | Up to 3500 mm in standard modular arrays, with larger custom assemblies |
| Çelik yüz yüze kalınlığı | 0.8–1.2 mm powder-coated or stainless plenum facing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 8000 kg/m³ for the optional 304 stainless-steel plenum and frame surfaces |
| Termal İletkenlik | Approximately 14–16 W/(m·K) for the optional 304 stainless-steel plenum and frame surfaces |
| Yüzey bitirme | White powder-coated steel or brushed 304 stainless steel with cleanable diffuser membrane |
| Ortak tip | Bolted gasketed ceiling modules with individually sealed HEPA cells and sealed service penetrations |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Perforated metal or tensioned textile diffuser surfaceIntegrated sealed LED lighting modulesGel-seal or gasket-seal HEPA cellsGlass perimeter skirts and equipment-rail cutouts
Planning a Cleanroom Laminar Flow Ceiling specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
