Complete modular cleanroom laminar flow ceiling with white HEPA filter array

Системы распределения воздуха в чистых помещениях

Ламинарный потоковый потолок в чистой комнате

A modular ceiling plenum and HEPA filter bank that supplies a broad, uniform low-velocity unidirectional airflow over a protected clean process zone.

Full-Surface HEPA Supply
Uniform Low-Velocity Airflow
Modular Filter Bank
Integrated Service and Lighting Zones

Запрос котировки Просмотреть продукты

Введение продукции

The cleanroom laminar flow ceiling combines a sealed supply plenum, multiple terminal HEPA filters and a continuous perforated or textile diffuser surface above the protected area. Airflow is balanced across several duct inlets and filter cells so the discharge velocity remains even from edge to center. The broad downward field sweeps airborne particles away from an operating table, filling line or open product zone with minimal lateral induction. Bolted modular sections accommodate lighting, service columns and ceiling equipment while maintaining sealed filter and perimeter interfaces.

Основные характеристики

A matrix of terminal HEPA filters spreads resistance across the complete protected ceiling area.

The continuous diffuser membrane or perforated face straightens local filter jets into a low-turbulence downward field.

Separate inlet plenums and balancing points allow edge and center zones to be equalized independently.

Modular structural frames accept sealed lighting and service openings without breaking the surrounding clean-air surface.

Обеспокоенность клиентов продуктами

A laminar ceiling must deliver nearly uniform velocity over a large footprint while fitting lights, equipment rails and service penetrations around the protected zone.

Center filters receive more air than edge filters, creating an uneven downward field.Multiple balanced inlets and zoned plenum sections distribute pressure across the full filter bank.

Gaps around lights interrupt the clean-air curtain over the critical work area.Flush sealed lighting modules occupy planned structural bays within the continuous diffuser layout.

A damaged filter cannot be isolated without opening a large common plenum.Individual room-side filter retainers and test points allow each cell to be inspected and replaced separately.

A rigid diffuser face is difficult to remove around suspended medical equipment.Modular perforated panels or tensioned textile sections provide local access without dismantling the whole ceiling.

Типичные приложения

Sterile pharmaceutical filling zonesHospital operating roomsAseptic product assemblyOpen process protection in biotechnologyPrecision microelectronics work areas

Технические параметры

Representative construction and size ranges for a modular HEPA-filtered laminar flow ceiling are shown below.

Основной материал	Glass-microfiber H14 HEPA filter packs in aluminum frames with polyurethane or gel seals
Толщина панели	0.8–1.2 mm plenum panels and 1.0–2.0 mm structural frame sections
эффективная ширина	1800–3500 mm typical protected ceiling width
Максимальная длина	Up to 3500 mm in standard modular arrays, with larger custom assemblies
Толщина линий стали	0.8–1.2 mm powder-coated or stainless plenum facing
Плотность ядра	Approximately 8000 kg/m³ for the optional 304 stainless-steel plenum and frame surfaces
Теплопроводимость	Approximately 14–16 W/(m·K) for the optional 304 stainless-steel plenum and frame surfaces
Поверхностная отделка	White powder-coated steel or brushed 304 stainless steel with cleanable diffuser membrane
Объединенный тип	Bolted gasketed ceiling modules with individually sealed HEPA cells and sealed service penetrations
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Perforated metal or tensioned textile diffuser surfaceIntegrated sealed LED lighting modulesGel-seal or gasket-seal HEPA cellsGlass perimeter skirts and equipment-rail cutouts

Planning a Cleanroom Laminar Flow Ceiling specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой