Sistem Distribusi Udara Cleanroom

Cleanroom Laminar Flow Ceiling

A modular ceiling plenum and HEPA filter bank that supplies a broad, uniform low-velocity unidirectional airflow over a protected clean process zone.

Full-Surface HEPA Supply
Uniform Low-Velocity Airflow
Modular Filter Bank
Integrated Service and Lighting Zones

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom laminar flow ceiling combines a sealed supply plenum, multiple terminal HEPA filters and a continuous perforated or textile diffuser surface above the protected area. Airflow is balanced across several duct inlets and filter cells so the discharge velocity remains even from edge to center. The broad downward field sweeps airborne particles away from an operating table, filling line or open product zone with minimal lateral induction. Bolted modular sections accommodate lighting, service columns and ceiling equipment while maintaining sealed filter and perimeter interfaces.

Fitur utama:

A matrix of terminal HEPA filters spreads resistance across the complete protected ceiling area.

The continuous diffuser membrane or perforated face straightens local filter jets into a low-turbulence downward field.

Separate inlet plenums and balancing points allow edge and center zones to be equalized independently.

Modular structural frames accept sealed lighting and service openings without breaking the surrounding clean-air surface.

Kekhawatiran produk pelanggan

A laminar ceiling must deliver nearly uniform velocity over a large footprint while fitting lights, equipment rails and service penetrations around the protected zone.

Center filters receive more air than edge filters, creating an uneven downward field.Multiple balanced inlets and zoned plenum sections distribute pressure across the full filter bank.

Gaps around lights interrupt the clean-air curtain over the critical work area.Flush sealed lighting modules occupy planned structural bays within the continuous diffuser layout.

A damaged filter cannot be isolated without opening a large common plenum.Individual room-side filter retainers and test points allow each cell to be inspected and replaced separately.

A rigid diffuser face is difficult to remove around suspended medical equipment.Modular perforated panels or tensioned textile sections provide local access without dismantling the whole ceiling.

Aplikasi yang Tipis

Sterile pharmaceutical filling zonesRuang operasi rumah sakitAseptic product assemblyOpen process protection in biotechnologyPrecision microelectronics work areas

Parameter teknis

Representative construction and size ranges for a modular HEPA-filtered laminar flow ceiling are shown below.

Bahan inti	Glass-microfiber H14 HEPA filter packs in aluminum frames with polyurethane or gel seals
Ketebalan Panel (Panel Thickness)	0.8–1.2 mm plenum panels and 1.0–2.0 mm structural frame sections
Efektif lebar	1800–3500 mm typical protected ceiling width
Panjang maksimum	Up to 3500 mm in standard modular arrays, with larger custom assemblies
Baja menghadap ketebalan	0.8–1.2 mm powder-coated or stainless plenum facing
Kepadatan inti (core density)	Approximately 8000 kg/m³ for the optional 304 stainless-steel plenum and frame surfaces
Konduktivitas Termal (Thermal Conductivity)	Approximately 14–16 W/(m·K) for the optional 304 stainless-steel plenum and frame surfaces
Permukaan selesai	White powder-coated steel or brushed 304 stainless steel with cleanable diffuser membrane
Jenis Bersama	Bolted gasketed ceiling modules with individually sealed HEPA cells and sealed service penetrations
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Perforated metal or tensioned textile diffuser surfaceIntegrated sealed LED lighting modulesGel-seal or gasket-seal HEPA cellsGlass perimeter skirts and equipment-rail cutouts

Planning a Cleanroom Laminar Flow Ceiling specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami