İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Kablo Penetration Seal
A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.
- Six Cable Passages
- EPDM Compression Insert
- Stainless Face Plates
- Four-Point Clamping
Ürün tanıtımı
The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.
Ana Özellikler
Four-point plate compression loads the EPDM insert evenly.
A solid center preserves sealing material between adjacent openings.
Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.
Müşteri Ürün Sorunları
Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.
Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.
Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.
Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.
Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.
Tipik uygulamalar
Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings
Teknik parametreler
Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.
| Temel malzemeler | Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners |
|---|---|
| Panel kalınlığı | 40-200 mm compatible wall or service-panel thickness |
| Effective Width (Etkili Genişlik) | 5-40 mm cable diameter per molded passage |
| Maksimum uzunluk | Up to 300 mm overall circular seal diameter |
| Çelik yüz yüze kalınlığı | 2.00-5.00 mm stainless pressure-plate thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1100-1300 kg/m³ for EPDM |
| Termal İletkenlik | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Yüzey bitirme | Black molded elastomer with brushed or satin stainless face plates |
| Ortak tip | Bolted axial compression of a multi-hole cable-sealing insert |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates
Planning a Cable Penetration Seal specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
