Three-quarter view of a six-hole cleanroom cable penetration seal

Aksesoris Instalasi Cleanroom

Penetrasi kabel Seal Penetrasi kabel

A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.

Six Cable Passages
EPDM Compression Insert
Stainless Face Plates
Four-Point Clamping

Perkenalan produk

The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.

Fitur utama:

Six separate molded passages maintain spacing between cable routes.

Four-point plate compression loads the EPDM insert evenly.

A solid center preserves sealing material between adjacent openings.

Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.

Kekhawatiran produk pelanggan

Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.

Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.

Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.

Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.

Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.

Aplikasi yang Tipis

Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings

Parameter teknis

Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.

Bahan inti	Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners
Ketebalan Panel (Panel Thickness)	40-200 mm compatible wall or service-panel thickness
Efektif lebar	5-40 mm cable diameter per molded passage
Panjang maksimum	Up to 300 mm overall circular seal diameter
Baja menghadap ketebalan	2.00-5.00 mm stainless pressure-plate thickness
Kepadatan inti (core density)	Sekitar 1100 - 1300 kg / m3 untuk EPDM
Konduktivitas Termal (Thermal Conductivity)	Sekitar 0,20 - 0,30 W / (m · K) untuk EPDM
Permukaan selesai	Black molded elastomer with brushed or satin stainless face plates
Jenis Bersama	Bolted axial compression of a multi-hole cable-sealing insert
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Different hole countsDiameter kabel campuran (diameter kabel campuran)EPDM or silicone insert304 or 316 stainless plates

Planning a Cable Penetration Seal specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami