Three-quarter view of a six-hole cleanroom cable penetration seal

クリーンルームの設置付属品

ケーブルの浸透シール

A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.

Six Cable Passages
EPDM Compression Insert
Stainless Face Plates
Four-Point Clamping

商品紹介

The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.

主要な特徴

Six separate molded passages maintain spacing between cable routes.

Four-point plate compression loads the EPDM insert evenly.

A solid center preserves sealing material between adjacent openings.

Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.

お客様の製品に関する懸念事項

Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.

Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.

Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.

Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.

Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.

典型的な用途

Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings

技術的なパラメータ

Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.

コア材料	Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners
パネルの厚さ	40-200 mm compatible wall or service-panel thickness
有効幅	5-40 mm cable diameter per molded passage
最大長さ	Up to 300 mm overall circular seal diameter
鋼鉄の厚さを直面する	2.00-5.00 mm stainless pressure-plate thickness
コア密度	Approximately 1100-1300 kg/m³ for EPDM
熱伝導率	Approximately 0.20-0.30 W/(m·K) for EPDM
表面仕上げ	Black molded elastomer with brushed or satin stainless face plates
ジョイントタイプ	Bolted axial compression of a multi-hole cable-sealing insert
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates

Planning a Cable Penetration Seal specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する