Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Installation Zubehör
Cable Penetration Seal
A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.
- Six Cable Passages
- EPDM Compression Insert
- Stainless Face Plates
- Vier-Punkt - Clamping
Produkteinführung
The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.
Key Features
Four-point plate compression loads the EPDM insert evenly.
A solid center preserves sealing material between adjacent openings.
Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.
Kunden Produktbedenken
Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.
Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.
Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.
Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.
Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.
Typische Anwendungen
Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings
Technische Parameter
Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.
| Core Material | Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners |
|---|---|
| Panel Dicke | 40-200 mm compatible wall or service-panel thickness |
| Effektive Breite | 5-40 mm cable diameter per molded passage |
| Maximale Länge | Up to 300 mm overall circular seal diameter |
| Stahl facing Dicke | 2.00-5.00 mm stainless pressure-plate thickness |
| Kerndichte | Approximately 1100-1300 kg/m³ for EPDM |
| Thermische Leitfähigkeit | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Oberfläche Finish | Black molded elastomer with brushed or satin stainless face plates |
| Gemeinsamer Typ | Bolted axial compression of a multi-hole cable-sealing insert |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates
Planning a Cable Penetration Seal specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
