Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Câble de pénétration Seal
A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.
- Six Cable Passages
- EPDM Compression Insert
- Stainless Face Plates
- Four-Point Clamping
Introduction de produit
The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.
Key Features
Four-point plate compression loads the EPDM insert evenly.
A solid center preserves sealing material between adjacent openings.
Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.
Préoccupations du client produit
Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.
Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.
Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.
Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.
Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.
Les applications typiques
Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings
Paramètres techniques
Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.
| Matériaux de base | Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners |
|---|---|
| Panneau épaisseur | 40-200 mm compatible wall or service-panel thickness |
| Largeur effective | 5-40 mm cable diameter per molded passage |
| Longueur maximale | Up to 300 mm overall circular seal diameter |
| Acier face épaisseur | 2.00-5.00 mm stainless pressure-plate thickness |
| Densité Core | Approximately 1100-1300 kg/m³ for EPDM |
| Conductivité thermique | Approximately 0.20-0.30 W/(m·K) for EPDM |
| surface finie | Black molded elastomer with brushed or satin stainless face plates |
| Type joint | Bolted axial compression of a multi-hole cable-sealing insert |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates
Planning a Cable Penetration Seal specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
