Three-quarter view of a six-hole cleanroom cable penetration seal

Аксессуары для установки в чистых помещениях

Проникновение кабеля

A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.

Six Cable Passages
EPDM Compression Insert
Stainless Face Plates
Four-Point Clamping

Введение продукции

The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.

Основные характеристики

Six separate molded passages maintain spacing between cable routes.

Four-point plate compression loads the EPDM insert evenly.

A solid center preserves sealing material between adjacent openings.

Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.

Обеспокоенность клиентов продуктами

Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.

Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.

Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.

Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.

Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.

Типичные приложения

Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings

Технические параметры

Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.

Основной материал	Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners
Толщина панели	40-200 mm compatible wall or service-panel thickness
эффективная ширина	5-40 mm cable diameter per molded passage
Максимальная длина	Up to 300 mm overall circular seal diameter
Толщина линий стали	2.00-5.00 mm stainless pressure-plate thickness
Плотность ядра	Approximately 1100-1300 kg/m³ for EPDM
Теплопроводимость	Approximately 0.20-0.30 W/(m·K) for EPDM
Поверхностная отделка	Black molded elastomer with brushed or satin stainless face plates
Объединенный тип	Bolted axial compression of a multi-hole cable-sealing insert
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates

Planning a Cable Penetration Seal specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой