Three-quarter view of a six-hole cleanroom cable penetration seal

클린룸 설치 액세서리

케이블 침투 씰

A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.

Six Cable Passages
EPDM Compression Insert
Stainless Face Plates
Four-Point Clamping

견적 요청 제품 찾아보기

상품 소개

The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.

주요 기능

Six separate molded passages maintain spacing between cable routes.

Four-point plate compression loads the EPDM insert evenly.

A solid center preserves sealing material between adjacent openings.

Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.

고객 제품 관심사

Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.

Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.

Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.

Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.

Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.

일반적인 응용 프로그램

Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings

기술 매개변수

Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.

핵심 재료	Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners
패널 두께	40-200 mm compatible wall or service-panel thickness
유효 폭	5-40 mm cable diameter per molded passage
최대 길이	Up to 300 mm overall circular seal diameter
강철 면면 두께	2.00-5.00 mm stainless pressure-plate thickness
코어 밀도	Approximately 1100-1300 kg/m³ for EPDM
열전도도 (Thermal Conductivity)	Approximately 0.20-0.30 W/(m·K) for EPDM
표면 마무리	Black molded elastomer with brushed or satin stainless face plates
접합 유형	Bolted axial compression of a multi-hole cable-sealing insert
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates

Planning a Cable Penetration Seal specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.