Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Penetración de cable Seal
A multi-hole EPDM compression transit that organizes and seals several cables through one cleanroom wall opening.
- Six Cable Passages
- EPDM Compression Insert
- Stainless Face Plates
- Four-Point Clamping
Introducción del producto
The cable penetration seal combines a molded six-hole EPDM insert with two circular stainless pressure plates and four perimeter fasteners. Tightening the plates compresses the elastomer around individual cable routes and against the surrounding opening. A solid center and defined passages keep multiple services organized while presenting smooth, accessible faces on the partition.
Características clave
Four-point plate compression loads the EPDM insert evenly.
A solid center preserves sealing material between adjacent openings.
Stainless pressure plates protect the elastomer edges and provide clean exposed surfaces.
Preocupaciones del producto del cliente
Multiple loose cables through one opening create irregular gaps, abrasion points and an untidy surface that is difficult to seal consistently.
Bundled cables leave uncontrolled air paths between conductors.Individual molded passages establish separate compression zones around each cable.
Sharp panel edges abrade cable jackets.The framed elastomer insert isolates cables from the cut opening.
Uneven tightening distorts the seal and leaves local gaps.Four evenly positioned fasteners distribute plate pressure across the insert.
Future cable changes are difficult with permanent potting compounds.The bolted assembly can be released for compatible cable replacement or insert servicing.
Aplicaciones típicas
Cleanroom instrumentation cablesControl wiring penetrationsSensor lead routingUtility-panel cable transitsEquipment service openings
Parámetros técnicos
Typical construction ranges for a circular multi-cable cleanroom compression seal are listed below.
| Materiales Core | Molded black EPDM multi-hole insert with 304 or 316 stainless plates and fasteners |
|---|---|
| Panel de espesor | 40-200 mm compatible wall or service-panel thickness |
| Ancho efectivo | 5-40 mm cable diameter per molded passage |
| Longitud máxima | Up to 300 mm overall circular seal diameter |
| Acero frente a espesor | 2.00-5.00 mm stainless pressure-plate thickness |
| Densidad Core | Approximately 1100-1300 kg/m³ for EPDM |
| Conductividad térmica | Approximately 0.20-0.30 W/(m·K) for EPDM |
| Superficie acabada | Black molded elastomer with brushed or satin stainless face plates |
| Tipo conjunto | Bolted axial compression of a multi-hole cable-sealing insert |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Different hole countsMixed cable diametersEPDM or silicone insert304 or 316 stainless plates
Planning a Cable Penetration Seal specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
