Waterproof cleanroom socket with stainless plate and closed hinged cover

Iluminação de sala limpa e equipamentos elétricos

Z Socket Cleanroom à prova d'água

A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.

Gasketed Hinged Cover
Washdown-Resistant Plate
Sealed Rear Enclosure
Stainless Hinge and Captive Screws

Solicite um orçamento. Browse produtos

Introdução do produto

The waterproof socket adds a spring- or latch-retained cover over a recessed power module. A separate gasket seals the cover against the faceplate, and another concealed seal closes the plate to the wall. Stainless hinges and a formed drip edge direct water away from the receptacle while a gland protects the incoming cable at the rear box.

Características-chave

The protective lid closes the outlet cavity during room washing.

A molded cover seal compresses around the receptacle opening.

Stainless hinge components resist repeated wet operation.

The sloped cover edge sheds droplets away from the socket face.

A sealed rear enclosure prevents water bypass through the wall cavity.

Preocupações do produto do cliente

A covered outlet must keep water away from live contacts without becoming a deep, difficult-to-clean pocket itself.

Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.

Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.

A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.

Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.

Aplicações típicas

Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays

Parâmetros técnicos

Typical configurable construction ranges for a waterproof cleanroom socket are listed below.

Material principal	SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box
Painel de espessura	2.0-4.0 mm cover and sanitary plate thickness
Largura efetiva	130-260 mm covered outlet width
Comprimento máximo	Up to 340 mm overall plate height
Aço enfrentando espessura	2.0-3.0 mm SUS316L exposed plate and lid
Densidade Core	Approximately 7900-8000 kg/m³ for the stainless exposed components
Condutividade térmica	14-16 W/(m·K) for the stainless cover and plate
Superfície acabado	Fine-brushed or electropolished stainless with colored watertight receptacle insert
Tipo conjunto	Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid

Planning a Waterproof Cleanroom Socket specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe