Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Waterproof Cleanroom Socket
A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.
- Gasketed Hinged Cover
- Washdown-Resistant Plate
- Sealed Rear Enclosure
- Stainless Hinge and Captive Screws
Introducción del producto
The waterproof socket adds a spring- or latch-retained cover over a recessed power module. A separate gasket seals the cover against the faceplate, and another concealed seal closes the plate to the wall. Stainless hinges and a formed drip edge direct water away from the receptacle while a gland protects the incoming cable at the rear box.
Características clave
A molded cover seal compresses around the receptacle opening.
Stainless hinge components resist repeated wet operation.
The sloped cover edge sheds droplets away from the socket face.
A sealed rear enclosure prevents water bypass through the wall cavity.
Preocupaciones del producto del cliente
A covered outlet must keep water away from live contacts without becoming a deep, difficult-to-clean pocket itself.
Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.
Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.
A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.
Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.
Aplicaciones típicas
Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays
Parámetros técnicos
Typical configurable construction ranges for a waterproof cleanroom socket are listed below.
| Materiales Core | SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box |
|---|---|
| Panel de espesor | 2.0-4.0 mm cover and sanitary plate thickness |
| Ancho efectivo | 130-260 mm covered outlet width |
| Longitud máxima | Up to 340 mm overall plate height |
| Acero frente a espesor | 2.0-3.0 mm SUS316L exposed plate and lid |
| Densidad Core | Approximately 7900-8000 kg/m³ for the stainless exposed components |
| Conductividad térmica | 14-16 W/(m·K) for the stainless cover and plate |
| Superficie acabada | Fine-brushed or electropolished stainless with colored watertight receptacle insert |
| Tipo conjunto | Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid
Planning a Waterproof Cleanroom Socket specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
