Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Waterproof Cleanroom Socket
A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.
- Gasketed Hinged Cover
- Washdown-Resistant Plate
- Sealed Rear Enclosure
- Stainless Hinge and Captive Screws
Introduction de produit
The waterproof socket adds a spring- or latch-retained cover over a recessed power module. A separate gasket seals the cover against the faceplate, and another concealed seal closes the plate to the wall. Stainless hinges and a formed drip edge direct water away from the receptacle while a gland protects the incoming cable at the rear box.
Key Features
A molded cover seal compresses around the receptacle opening.
Stainless hinge components resist repeated wet operation.
The sloped cover edge sheds droplets away from the socket face.
A sealed rear enclosure prevents water bypass through the wall cavity.
Préoccupations du client produit
A covered outlet must keep water away from live contacts without becoming a deep, difficult-to-clean pocket itself.
Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.
Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.
A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.
Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.
Les applications typiques
Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays
Paramètres techniques
Typical configurable construction ranges for a waterproof cleanroom socket are listed below.
| Matériaux de base | SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box |
|---|---|
| Panneau épaisseur | 2.0-4.0 mm cover and sanitary plate thickness |
| Largeur effective | 130-260 mm covered outlet width |
| Longueur maximale | Up to 340 mm overall plate height |
| Acier face épaisseur | 2.0-3.0 mm SUS316L exposed plate and lid |
| Densité Core | Approximately 7900-8000 kg/m³ for the stainless exposed components |
| Conductivité thermique | 14-16 W/(m·K) for the stainless cover and plate |
| surface finie | Fine-brushed or electropolished stainless with colored watertight receptacle insert |
| Type joint | Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid
Planning a Waterproof Cleanroom Socket specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
