English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
مقبس غرف الأبحاث للماء
A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.
- Gasketed Hinged Cover
- Washdown-Resistant Plate
- Sealed Rear Enclosure
- Stainless Hinge and Captive Screws
مقدمة المنتج
The waterproof socket adds a spring- or latch-retained cover over a recessed power module. A separate gasket seals the cover against the faceplate, and another concealed seal closes the plate to the wall. Stainless hinges and a formed drip edge direct water away from the receptacle while a gland protects the incoming cable at the rear box.
الخصائص الرئيسية
A molded cover seal compresses around the receptacle opening.
Stainless hinge components resist repeated wet operation.
The sloped cover edge sheds droplets away from the socket face.
A sealed rear enclosure prevents water bypass through the wall cavity.
مخاوف المنتج للعملاء
A covered outlet must keep water away from live contacts without becoming a deep, difficult-to-clean pocket itself.
Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.
Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.
A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.
Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.
تطبيقات نموذجية
Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays
المعلمات الفنية
Typical configurable construction ranges for a waterproof cleanroom socket are listed below.
| المواد الأساسية | SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box |
|---|---|
| سمك اللوحة | 2.0-4.0 mm cover and sanitary plate thickness |
| العرض الفعال | 130-260 mm covered outlet width |
| الحد الأقصى الطول | Up to 340 mm overall plate height |
| الصلب يواجه سمك | 2.0-3.0 mm SUS316L exposed plate and lid |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for the stainless exposed components |
| الموصلية الحرارية | 14-16 W/(m·K) for the stainless cover and plate |
| إنهاء السطح | Fine-brushed or electropolished stainless with colored watertight receptacle insert |
| نوع المشترك | Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid
Planning a Waterproof Cleanroom Socket specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
