Waterproof cleanroom socket with stainless plate and closed hinged cover

클린룸 조명 및 전기 장비

방수 클린룸 소켓

A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.

Gasketed Hinged Cover
Washdown-Resistant Plate
Sealed Rear Enclosure
Stainless Hinge and Captive Screws

견적 요청 제품 찾아보기

상품 소개

The waterproof socket adds a spring- or latch-retained cover over a recessed power module. A separate gasket seals the cover against the faceplate, and another concealed seal closes the plate to the wall. Stainless hinges and a formed drip edge direct water away from the receptacle while a gland protects the incoming cable at the rear box.

주요 기능

The protective lid closes the outlet cavity during room washing.

A molded cover seal compresses around the receptacle opening.

Stainless hinge components resist repeated wet operation.

The sloped cover edge sheds droplets away from the socket face.

A sealed rear enclosure prevents water bypass through the wall cavity.

고객 제품 관심사

A covered outlet must keep water away from live contacts without becoming a deep, difficult-to-clean pocket itself.

Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.

Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.

A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.

Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.

일반적인 응용 프로그램

Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays

기술 매개변수

Typical configurable construction ranges for a waterproof cleanroom socket are listed below.

핵심 재료	SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box
패널 두께	2.0-4.0 mm cover and sanitary plate thickness
유효 폭	130-260 mm covered outlet width
최대 길이	Up to 340 mm overall plate height
강철 면면 두께	2.0-3.0 mm SUS316L exposed plate and lid
코어 밀도	Approximately 7900-8000 kg/m³ for the stainless exposed components
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for the stainless cover and plate
표면 마무리	Fine-brushed or electropolished stainless with colored watertight receptacle insert
접합 유형	Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid

Planning a Waterproof Cleanroom Socket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.