Waterproof cleanroom socket with stainless plate and closed hinged cover

Pencahayaan bilik bersih dan peralatan elektrik

Soket bilik bersih kalis air

A washdown-oriented power outlet with a gasketed protective cover that closes over the receptacle when it is not in use.

Gasketed Hinged Cover
Washdown-Resistant Plate
Sealed Rear Enclosure
Stainless Hinge and Captive Screws

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The waterproof socket adds a spring- or latch-retained cover over a recessed power module. A separate gasket seals the cover against the faceplate, and another concealed seal closes the plate to the wall. Stainless hinges and a formed drip edge direct water away from the receptacle while a gland protects the incoming cable at the rear box.

Ciri-ciri Utama

The protective lid closes the outlet cavity during room washing.

A molded cover seal compresses around the receptacle opening.

Stainless hinge components resist repeated wet operation.

The sloped cover edge sheds droplets away from the socket face.

A sealed rear enclosure prevents water bypass through the wall cavity.

Kebimbangan Produk Pelanggan

A covered outlet must keep water away from live contacts without becoming a deep, difficult-to-clean pocket itself.

Spray reaches the contacts of an uncovered receptacle.A gasketed lid shields the socket whenever no plug is connected.

Water pools on a horizontal cover ledge.The profiled face and drip edge direct liquid away from the opening.

A corroded hinge stops the cover closing fully.Stainless hinge pins and retained springs preserve reliable closure.

Moisture travels behind the plate through the supply cable.The rear box uses a dedicated compression gland around the cable.

Permohonan yang biasa

Damp cleanroomsWashdown utility zonesFood-process clean areasEquipment cleaning bays

Parameter teknikal

Typical configurable construction ranges for a waterproof cleanroom socket are listed below.

Bahan Teras	SUS316L faceplate and cover with engineering-polymer receptacle, elastomer seals and enclosed rear box
Ketebalan Panel	2.0-4.0 mm cover and sanitary plate thickness
Lebar berkesan	130-260 mm covered outlet width
Panjang maksimum	Up to 340 mm overall plate height
Keluli Menghadapi Ketebalan	2.0-3.0 mm SUS316L exposed plate and lid
Ketumpatan teras	Approximately 7900-8000 kg/m³ for the stainless exposed components
Kekonduksian Terma	14-16 W/(m·K) for the stainless cover and plate
Kemasan permukaan	Fine-brushed or electropolished stainless with colored watertight receptacle insert
Jenis Bersatu	Gasketed hinged lid over a flush socket plate with concealed wall seal and rear cable gland
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single or dual covered outletRegional or IEC pin configurationInterlocked coverLockable lid

Planning a Waterproof Cleanroom Socket specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami